Storage Drawer for the 100 extended mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small storage for underneath the printer, specific to the size of the 100 extended mod
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a small storage cabinet specific to the 100 extended mod, but could be used elsewhere as it's not anchored to the unit. It's meant to be printed twice - each side is one half. There is a small pin and hole on the side to help glue the two together, and spots for 10mm rubber feet on the bottom to keep it from moving around.
It's a crude design as I'm still novice at OnShape and CAD design. Lots of room for improvement. I can provide the STEP/3MF files if requested.
I printed the case and dividers in PLA and the tray in PETG, but any material would work. I would suggest 3-4 walls/perimeters and 15-20% cubic infill, but whatever you think is best would work too. No supports needed as long as you place them on the plate correctly.
Sorry, I didn't design these in the proper printing orientation, so you'll need to make sure they're oriented correctly on the build plate.
I used hot glue to glue them together but super glue should work too. The dividers are not required.