1 / 2
Ikea 365 lid for smal rectangular food container (180x120)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printable model of the smal rectangular lid that is no longer available from IKEA.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 68
- Makes
- 0
- Views
- 433
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Model should be printed in PP!
Only for the brave!
I successfully printed this in Smartfil PP White. Using packing tape on the Bambu lab Engineering plate.
Adjusted a petg profile, 225*C, 70*C bed. 7mm3/s, 25-60% fan. Brim!, no cooling first 5 layers. Packing tape must be attached precise and around the corners.
You will need to use the original gasket.
If you by chance have both PP and PP-GF in stock, use the GF material after the third layer or so to be the perfectionist not relying on a little bit of luck.