Talaria X3 Tail Extender
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tail extender for the Talaria XXX. Redesigned to hide the screws.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 290
- Makes
- 1
- Views
- 1,809
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I created this to prevent water / mud from flying up onto my back and helmet, and to add some sharpness to the esthetics of the bike.
Bill of Materials:
2 - M4 x 6mm screws
2 - M4 nuts
Attached to this is an assembly pdf. (not updated yet). I found it best to use magnets to keep / guide the nuts into place after the mounts are put on. The printing profile in the 3mf is what I did to keep color changes low, but if you want better quality layers, turn it however suits your needs.
Change log:
2024-12-18: Updated model to only require 2 screws / nuts. Screws are now internal so the outside is smooth (no screws visible on outside). Added STEP files and 3mf.
2024-07-12: Added small strengthening chamfers and fillets to bracket mounts.
2024-07-10: Added new model with no vents.
2024-02-11: Added new contour style.
2024-02-10: Widened screw holes. Extended mount bracket frame side length.
2024-02-09: Fixed artifact in the underside geometry. Thickened connections on mount bracket.
2024-1-2: Rounded vent edges.
2023-12-27: Updated outer-most edge to be thicker to strengthen the sharp tips on each side.