Gridfinity dashboard module for 8.8" 1920x480 ultra-wide touch screen and 3 M5Stack dials
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity dashboard module for 8.8" 1920x480 ultra-wide touch screen and 3 M5Stack dials
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 35
- Makes
- 0
- Views
- 3,951
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity dashboard module for 8.8" 1920x480 ultra-wide touch screen and 3 M5Stack dials
I used this display: https://nl.aliexpress.com/item/1005003014364673.html (with touch)
Requires interface plates and magnets to connect to a Gridfinity base plate.
Requires 3 x dowels, printed straight up, with a brim.
Print the bracket on the side.
No support material needed.
You need two brackets, one of them mirrored in the y-axis in the slicer.
You need to use angled USB-micro and Mini-HDMI connectors, for the display.
There is no room for permanently connected USB-C connectors to the M5Stack dials.
I provided 12V power to the power connectors of the M5Stack dials.
You can connect a USB-C connector via the bottom hole, for software development.
I used adaptive cubic infill pattern.
I used PLA with a 0.2mm layer height and with a 0.4mm nozzle.
Included is the f3d file
You can find examples, on how to connect this display to a Raspberry Pi, on GitHub.
For use with Microsoft Flight Simulator 2020, see here on GitHub.