Flexy Skelly
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A skeleton that can be placed in simple poses if supported or simply hung by a thin wire or thread through the head.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 113
- Makes
- 0
- Views
- 505
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The skeleton is designed to need no glue or screws for assembly and everything is a push fit.
The limbs on the skeleton are designed to be loose.
The upper and lower limbs for the legs are interchangeable between left and right with the exception of the feet which have a defined side.
The upper and lower limbs for the arm are interchangeable between left and right with the exception of the hands which have a defined side.
The upper and lower torso are designed to be a tight fit but does allow positioning.
Pose on your workspace or hang it from the mirror in you car for more of a wobble body rather than a bobble head.
Print details.
All elements are printed in PLA Luminous filament
Layer Height: 0.15 mm
Infill Density: 100%
Base Adhesion: Skirt
Weight: ~28g
Assembled Size: 120 (L) x 50(W) X 20 (H) mm
Post Processing.
Remove any blobs, strings or blemishes on the contact surfaces and ensure they are smooth by light sanding or filing.
Assembly
Assemble the legs and push into the pelvis.
Assemble the arms and push into the shoulders then insert the caps to hold them inplace.
Press the upper and lower torso together.
Push the head onto the neck.