Isuzu Gemini Board
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.12 – €1.37 net (excluding VAT)
For file: Name Board.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.25 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 53.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is multicolor simple name board
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 20
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
This is a simple multicolour name board i made for a friend. I used only 3 colours, The G-Code i have attached will work with Prusa Mini+ IS firmware and will Notify you when you need to change the filament. You can print in any colours you want or you can print in single colour. I have included both G-Codes.
Use 0.2 Layer height or Multiples of it for better results
Sorry i don't have the printed model as this was a gift and didn't have the time for that :(