Parametric screwdriver socket adapter (1/2 inch socket variant)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn your screwdriver into a socket to turn nuts. not as good as a socket, but sometimes you don't have that.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
parametric adapter, female to female, you can change the size from ½ in to anything you'd like in onshape. You can also change the depth of both of the holes. Originally designed for a ¼ in screwdriver, but it is parametric so if you somehow have something else, you can modify that dimension too.
You can make a copy and edit with Onshape. Edit the variables to change the dimensions.
Inner chamfers for strength
Exterior chamfers for aesthetics, elephants foot prevention, and preventing sharp edges
I would recommend printing with a lot of side walls if you need even a small amount of strength. This is not a long term solution. If you have a socket set, use that and don't print this. Obviously.
Yes everything is metric. Even though the dimensions I needed were imperial. Deal with it.