1 / 4
Squeezebox Keyboard v2105
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Split ergonomic computer keyboard with a unique keywell shape and highly tailor fit.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 52
- Makes
- 0
- Views
- 951
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
Split ergonomic computer keyboard. Features adjustable per-finger column stagger, adjustable per-finger splay angle, independent and easily replaceable components. Designed to hold Kailh Choc key switches using Kailh hot-swap sockets. Designed for an Elite-C microcontroller.
Slicing Instructions
See the include screenshot from Prusa Slicer for orientation of parts on the build plate.
- Print the keywells with their narrow edge on the plate. A skirt may help but mine were mostly fine with no skirt.
- Print the pillars with the cylinder part on top
- Print the thumb cluster like a food serving tray with the bottom on the plate
- Print the PCB housing with the face where the connectors go face down on the plate
- You'll need to print one of these as-is and the other one you need to mirror this along the Y axis before slicing to get the symmetry right
I use 0.2mm layer height and a 0.4mm nozzle
What to Print
To make a full split keyboard you need the following count of prints
- 6 single finger columns
- 2 double finger columns
- 2 thumb clusters
- 2 thumb bases
- 2 thumb standoffs
- 2 PCB walls
- 4 pinky columns
- 4 ring columns
- 4 middle columns
- 4 index columns
- 18 washers
Additional Hardware Required
- 2 Elite-C microcontrollers
- 2 RJ-9 jacks
- 2 reset buttons
- M3 heat set threaded inserts (about 20)
- M3 bolts (about 20)
- 1 RJ-9 cable
- 1 USB-C cable
- 42 diodes
- 42 Kailh hot-swap sockets
- 42 Kailh choc switches
- 24 AWG copper wire or similar