1 / 8
PSU Case ZK-4KX with USB-C
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small lab bench power supply power by usb-c
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 102
- Makes
- 0
- Views
- 761
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
During assembly, its the easiest to first install the banana jacks and put the cables on them. Insert the cables into the ZK-4KX before putting it into the print. It is quite hard to insert the wires, when it is in the 3D print, but you can wedge it in with the wires on.
Hardware needed:
- ZK-4KX
- Banana Sockets (19mm apart)
- 4x M3 x6-20mm countersunk screw (you could even go longer, I use 12mm)
- 2x M3 x 10-12mm cylinder head screw
- USB-C Decoy Board
- or DC Power Socket with outside diameter of 10.5mm