1 / 2
SMT Solder Paste Stencil Printer Table
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SMT Solder Paste Stencil Printer Table, no support is needed, but with lots of heat insert nut.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 107
- Makes
- 0
- Views
- 859
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
SMT Solder Paste Stencil Printer Table, no support is needed, but with lots of heat insert nut. I don't insert all the nuts in the photos, but you know the meaning.
You must use a frameless SMT stencil, which you could order from PCBWay or Aliexpress. The PCB size limitation is around 14x14cm, having 1.0mm, 1.6mm, and 2.0mm PCB thickness adaptors. I've tested PETG-CF filament, but I think PLA should work too.
BOM:
- ~150x M3x3x4.2mm Heat Insert Nut (M3 thread with 4.2mm outer diameter, 3mm length), like the ones in the photo
- ~20x M3x6mm Hex Socket Head Screw (for block setting)
- 2x M3x10mm Hex Socket Head Screw (for hinge)
