Red Heart Pom and Tassel Maker Replacement Pin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pin to replace a lost pin for MIL's Tassel Maker
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
This Model was made to replace a lost pin for my MIL's Tassel maker. 80mm length. You may need to scale up or down very slightly to fit. Please not that the end to be inserted is tapered inward. I would recommend .2mm layer height. Mine is printed in PLA with 3 walls and 15% infill, but the pin is so thin that infill likely won't make up much of it anyway. It took about an hour and a half to print for me, Cura indicated 1 hr 11 mins, but since installing BL Touch, my prints seem to take longer. Made up in Fusion, and I'm leaving the fusion file as well, but this is a very basic thing to make up if you need a pin for different purposes.