1 / 3
Bracket for Nema 17 stepper motor - Reinforced
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Strong bracket for nema 17
- Rating
- 0 / 5
- Likes
- 41
- Downloads
- 356
- Makes
- 0
- Views
- 770
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
Strong and easy to print bracket for Nema 17 stepper motor.
Bracket was designed from scratch for my DIY 3D printer.
Main goals for design :
- bracket must cooperate with end mount for motor screew ( this means that some of its dimmensions will be similar or same to brackets available on the market),
- bracket must withstand a lot of torque,
- bracket must have enough clearence under the motor to fit spanner for bolts retightening,
- holes for stepper motor must be bigger to prevent printing too small or too tight holes because of bad settings in the slicer.
- bracket should not block motor cables,
- bracket must be easy to print.
Tested with below print parameters :
- Material : PLA
- Cura profile : draft 0.2mm
- Print speed : 64 mm/s
- wall count : 4
- infil densiti : 15%
- printing temperature : 220 *C
- build plate temperature : 68 *C