Prusament Mini Spool Extruder Visualizer for Sovol SV06 / Plus
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attaches to your Sovol SV06 extruder motor shaft so you can see it spinning, in style.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 70
- Makes
- 2
- Views
- 685
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print one of each file. They just snap together without glue.
Please note: depending on the tolerances of your printer, this may be a very, very tight fit onto the motor shaft. I had to scrape mine out a bit with an X-Acto knife before it would fit.
The visualizer does not press all the way into the extruder shaft; please leave a small gap it can still spin freely without rubbing.
This visualizer probably makes for a poor knob. If you need to spin your extruder shaft by hand often, then you'll need to glue all the pieces together so they don't slip when turned manually.