Parametric Wall Thickness for Happy Chunky Bum Sitting Pot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I tried printing the original at 300% scale but the walls were a bit thicc so uwu
- Rating
- 4.5 / 5
- Likes
- 29
- Downloads
- 195
- Makes
- 2
- Views
- 1,229
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To adjust the wall thickness, open pot.blend in Blender and set the “Thickness” of the Solidify modifier applied to the “Chunky sitting pot” object. I use a boolean modifier with a cube to “open" the top of the solidified pot so you may need to adjust the position of the “Cube” object if you have thicc walls.
Currently in the provided file, I have it set to 0.8 m which corresponds to a 1.6 mm thickness when exported at scale factor 10.
When exporting to STL, set the scale factor to 10 (or just rescale in the slicer) since Blender's default distance metric doesn't really line up with that of most slicers.