Track saw parallel guide 16 mm (Makita, Festool, Bosch, Metabo...)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Your cheap and fast to print parallel guide.
- Rating
- 5 / 5
- Likes
- 95
- Downloads
- 247
- Makes
- 2
- Views
- 5,921
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A fast and cheap parallel guide for 16 mm track saw or router rails. After aligning the guide rail clamp it and remove the parallel guides.
Printing recommendations
Filament: PETG or better
Infill: 15%
I've designed two different versions of the stop block, with 20 mm and 10 mm flange height. Print the one that fits your needs or print both and change when needed.
Additional hardware needed (cost: less than 10 €):
2x 10 mm stainless steel rods, length according to your needs (mine are 500 mm long)
2x M6 Hexagon bolts, 25 mm long
2x M6 Nuts
If necessary widen the holes for the hexagon bolts with a 6 mm drill.
Glue the bolts with 2K epoxy glue. Don't use super glue as it won't last long.
If you like this design, please post your print with a picture.
Anybody willing to support with a small donation is more than welcome ;-)
 | |
|---|---|
 |