Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silika / humidity + temperature Sunlu JAYO dryer S1 + silica
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.81 – €3.44 net (excluding VAT)
For file: Printed in Grey Prusa PLA with Supports / humanit__silica_v10-1_02mm_pla_mk3s_3h25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.13 excluding VAT (range midpoint).
- Weight reported by the author
- 33 g
- Print time reported by the author
- 3.42 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silica Ich habe mir eine Temperatur und Luftfeuchteanzeige für den…
- Rating
- 4.8 / 5
- Likes
- 53
- Downloads
- 242
- Makes
- 4
- Views
- 2,714
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Luftfeuchte + Temperatur Sunlu JAYO Trockner S1 + Silica
Ich habe mir eine Temperatur und Luftfeuchteanzeige für den Sunlu /JAYO Dryer S1 erstellt (Inspiriert durch andere Thingiverse Konstruktionen)
Benötigt wird eine M6 Mutter + M6 Schraube Länge 10-25mm
Tusätzlich zur Messwertanzeige habe ich noch Klipphalter und Silikal Behälter erstellt um die Luftfeuchte, wenn der Trockner außer betrieb ist unten zu halten.
Geeignet für Silica Kugeln größer 2mm
Air humidity + temperature Sunlu JAYO dryer S1 + silica
I created a temperature and humidity display for the Sunlu / JAYO Dryer S1 (inspired by other Thingiverse constructions)
You need an M6 nut + M6 screw length 10-25mm.
In addition to the measured value display, I also created clip holders and Silikal containers to keep the air humidity down when the dryer is out of order.
Suitable for silica balls larger than 2mm.
Silica:
https://www.ebay.de/itm/353332295503?var=622509094398
or
https://www.ebay.de/itm/114518595035?var=414708381083
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Filament: you want you want
Category: 3D Printing