Center Hub (2 piece) for Tecbears Spool
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.70 – €0.85 net (excluding VAT)
For file: Center Hub - Tecbears 25 pin v5_0.2mm_PLA_MK3S_57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.77 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 57 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Made a 2-piece center hub for the Tecbears Spool that's fits over the stock Prusa spool holder.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
2 Piece Center Hub for a Tecbears filament spool. Glue the pins into one of hubs. Then put some glue on the tips of the pins, insert this hub into one side of the spool and another hub into the other side. Line up the pins, and hold together. Let sit to cure.
The spool should slide right over the stock Prusa spool holder arm.
Down side of this design is that you can't disassemble for recycling after spool is empty… I'll be working on a 1-piece after this that you could disassemble.