1 / 8
Soldering Vise
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vise for soldering work.
- Rating
- 5 / 5
- Likes
- 84
- Downloads
- 448
- Makes
- 2
- Views
- 3,036
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Feature
- Jaw span 100 mm, width 50 mm, height 30mm
- Enough size to hold small PCBs. - Vise cap is changeable when it is damaged or worn out.
- Also you can choose the shape and material of the vise cap
ex) flat-face, slots-face, PLA, TPU, rubber, metal, etc.
If you want to design your own cap, refer to the attached drawing.
A cap is secured with two M4 screws. Thread depth is 20 mm.- The model includes the threads but it may be better tapping through them.
- A M10x1.5 mm pitch 200 mm length Hex bolt is necessary.
- You can try to 3D print it with attached model. - It is stable as the vise is rather big and has some weight.
- If you want to clamp it to the table, you can use the three 8mm dia. and 30mm length slots.
3D Print condition (reference)
- Body: PLA, Vise cap: PLA, TPU or other materials as you like.
- Infill: 20%
- Support: Not necessary EXCEPT screw head and vise caps.
- Walls: more than or equal to 3
- Layer height: 0.2 mm
- Nozzle: 0.4 mm