Sonos Era 100 wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sonos Era 100 wall mount
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 229
- Makes
- 2
- Views
- 2,788
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Sonos ERA 100 wall mount consists of 4 parts, which are connected to each other with the help of Allen screws a standard ruthex M3 heat inserts.
M3x8 cylinder head - 4pcs
M3x10 tapered head - 4pcs
Recommendation for printing: nozzle 0.4 mm, 6 perimeters, layer height 0.2 mm, 25% infill, 5 lower and 5 upper layers. (I used Pla filament - I think strong enough)
A round platform requires the use of supports on the underside. To fix the position of the speaker and prevent it from falling, it is necessary to use an M5 x 16mm cylinder head Allen screw from the bottom.
The advantage of the mount is the ability to rotate the speaker on a round platform.
Happy printing and listening :-D