1 / 2
Furniture footings height adjustable Vol. 2 — image 1
1 / 2

Furniture footings height adjustable Vol. 2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Three more patterns! No support, easy print. Includes almighty hex!

Rating
5 / 5
Likes
18
Downloads
111
Makes
1
Views
488
Reviews
1

Updated at source:

Model information

Category
Living Room
License
Creative Commons — Attribution — Share Alike

Simple and sturdy furniture footings. Volume 2 with three more patterns including lowPoly and the almighty Hex.

For the first series see: https://www.printables.com/de/model/691610-furniture-footings-height-adjustable

Prints well in 0.2 mm layer and 10% infill. For more stability increase perimeters (I recommend at least 5) or decrease layer thickness. Infill won't have much effect since the crucial part is the thread. PLA should be enough but feel free to use PETG or even ASA for heavy duty.

Every footing consists of a base with a 5 mm hole for attaching the base to the furniture (4x25 Screw should do the job) and a M15x25 mm thread. In addition to the Base there is a Screw fitting to the M15 allowing for height adjustment of round about 15 mm. Just screw it in completely if you don't need any adjustments, the pattern should fit.

Have fun!

Tags