Reused Spool Tacklebox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A way to reuse IC3D spools by using them for storage.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 57
- Makes
- 0
- Views
- 495
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Spaced to fit around IC3D filament spools. I only drew up one orientation for the trays, but you can mirror them in your slicer along the X or Y axis to make the other side.
You might need to clear the pivot hole with a 11/64 drill bit before it'll fit easily. You'll also need to drill out the holes in the spools with the same bit. I used 8x3mm magnets to keep the trays closed. Most fit snugly just by pushing, but a few needed a dab of super glue to stay in place.
Finally, and this is totally optional, you can use a spare adhesive magnetic sheet that comes with new build plates to create a surface on the top that will hold your hooks and jigs in place. This is a little cooler in theory than in practice, because not all fishing hardware is made from magnetic metals.
Hardware:
4- #8 allthread
8- #8 lock nuts
#8 washers to go between trays in the same spool
8x3mm magnets to keep the trays closed.
By the way, this doesn't have to be a tackle box. You can use it for a sewing organizer or anything else that might need a lot of little trays.