Mintion beagle camera holder/arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a stand for a Mintion beagle camera, that allows it to be mounted on a side of 40 x 40 mm V slot extrusion.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 83
- Makes
- 0
- Views
- 631
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
All models should be able to be printed with minimal support or no support at all.
Every model that has x2 at the end of their name needs to be printed 2 times.
Each joint (except the one on the camera itself) will be locked in place after you screw on the nuts.
Except for the printed parts you will need, the nut and bolt from the original hinge of the camera. And 2 M4 T slot nuts with M4 bolts to attach the mouth onto the 40x40 or V slot extrusion
I tried to make some simple instructions if you don't know how the parts go together
Printed in: PLA, 0.15mm layer height, 30-50% infill.