1 / 4
TOOOL Box, Pinning Tray and Gutting Station — image 1
1 / 4

TOOOL Box, Pinning Tray and Gutting Station

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€3.65 – €4.46 net (excluding VAT)

For file: Lid_With_Logo_0.4n_0.2mm_PLA_MK4IS_2h51m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €4.06 excluding VAT (range midpoint).

Weight reported by the author
76 g
Print time reported by the author
2.85 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

A TOOOL Box with a built in pinning tray and gutting station for pin tumbler and disc detainer locks.

Rating
0 / 5
Likes
25
Downloads
98
Makes
0
Views
923
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

A TOOOL (The Open Organisation Of Lockpickers) Box to hold tools for lock disassembly with a built in pinning tray and gutting station.  Pinning tray includes cut outs for pin tumblers and disc detainer locks. Gutting station includes holes for plug followers, picks, and turning tools. 

The box can be printed with the handle attached or separately for printer size or two tone prints. If the handle is printed separately, it is designed to be attached with two M3 x 12 screws and two thin M3 square screws (5.5 x 5.5 x 1.8).

Tinkercad project can be found at https://www.tinkercad.com/things/1HCu4H6XCS8-toool-box-pinning-tray-and-gutting-station-

Known limitations:

  1. Rows for pins are a little shallow for larger diameter pins. Can still close the lid with Medeco pins, but they scratch it.  Slightly deeper pin rows would be an improvement.
  2. Mortise cylinders do not fit in main tray, its just a little too short. Slightly higher z axis for box would be an improvement.
  3. No locking mechanism to keep lids closed.
  4. No internal trays for tools, as there is lots of room for personal preference there.

Tags