MG Midget 3rd Brake Light Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts a 3rd brake light to the top two license plate bolts.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 36
- Makes
- 1
- Views
- 422
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
This mount uses the top two license plate mounting bolts to hold a 3rd brake light.
The bracket is mirrored, with an MG logo on one side, so if you don't want to see the logo, just mount it facing down.
For the LED light, I bought a set off Amazon. Just search for "PARTSMAN 6.5" Trailer Stop Turn Parking Tail Clearance Light Bars" and you should find it. they look like the attached dimensioned picture. You'll want to trim off the Brown wire, since that is for the dim light. White will be negative & Red will be positive.
For wiring, you'll want to source about 2'-0" of 20/2 Ø4mm OD wire and you'll want to also find some male bullet terminals that measure .195" in diameter.(e.g. McMaster-Carr #7835K61)
Attach your chosen connectors and fish the wire through the grommet that the passenger side license plate light is wired through. There should be two female bullet connectors available that feed the passenger side taillight/side marker, as shown in the one picture.(I had two on my car anyways).