Ender 3 S1 (Pro) ABL Fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bed leveling fix for Ender 3 S1 models.
- Rating
- 0 / 5
- Likes
- 33
- Downloads
- 174
- Makes
- 1
- Views
- 1,961
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Bed leveling fix for Ender 3 S1 models.
Follow word doc instructions or reposition ABL using provided files
Doc source: https://www.facebook.com/groups/602529180853579/permalink/723427122097117/?fs=e&s=cl
The following can be done with custom firmware without using pronterface:
https://github.com/ThomasToka/MarlinFirmware/releases/latest
To set probe offset for the included model, run:
M851 X-44 Y0 Z0
Before disassembling the printer or changing the mounting plate, manually try to level the bed as flat as possible.
Below can be used with pronterface; install CH340 driver if pronterface cannot detect printer.
Get current bed mesh values using M420 V .
- Turn the 4 knobs base on the reported values at the 4 corners
- Run G29 auto bed level to get the new adjusted value
- Repeat steps 1 and 2 until leveled
- (optional) Visualize the bed mesh to check if the bed is warped beyond saving (http://lokspace.eu/3d-printer-auto-bed-leveling-mesh-visualizer/)
- use 0 offset mount if the bed cannot be leveled properly and doc instruction didn't help. (Recommended to print with PETG, PLA breaks quite easily)
Category: 3D Printer Parts