XCTracer MAXX II Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
XCT Maxx 1/2 clip support, you can attach the instrument with screen down to prevent damages when stored in the backpack
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 91
- Makes
- 0
- Views
- 428
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Version 2.4:
-Deeper groove for velcro to add the possibility of cover the original velcro(hook) with a piece of velcro(loop) to prevent harness rubbing when stored
-Added Grip on removing tab for an easier remove.
This support is made for hold the XCTracer MAXX on your cockpit also when stoared into the backpack witrhout scratch the screen, just flip it upside down. when you flip it pay attention to do it vertcally, so the button goes under the larger lip, preventing it to be swiched on accindentally. The lil' tab on the lower lip is made for apply a bit of force to the lower lip for remove easily the instrument.
Print it as shown in the last picture, no support needed, designed and tested for PLA. PETG or ABS could be good options, but never tested the retention with those materials.