WATCH ME!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I've designed a clock with modular display for Funko-pop .
- Rating
- 5 / 5
- Likes
- 122
- Downloads
- 264
- Makes
- 8
- Views
- 2,805
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
Mechanical clock with various options and easy assembley.
HARDWARE:
2 pcs 5x5x5mm square magnets - for CLOCK BASE
2 pcs 10x2mm round magnets - for CLOCK PLATE (NOTE: CHECK POLARITY BEFORE GLUING)
simple clock mechanism
All big parts printed the same layers and perimetrs:
Filament- PLA
Layer height- 0.2mm ,5 up, 4 down
perimeter - 2
Infill - 15% Grid
FOR FUNKO-POP CLOCK:
1 pcs clock base+plate
4 YELLOW pcs hexa-shelf (to represent the numbers 12,3,6,9)
8 BLACK pcs hexa-shelf (to represent the other numbers and frame)
6 WHITE pcs hexa-shelf for the center
1 pcs wall mount B ( A is for out side hanging)
45 pcs clips
The assembly is easy- arrange the hexa-shelf as the picture and push the clip to the slot.
the wall mount works great with one screw. if you intend to put heavier thing you shold put 2 wall mount
ENJOY!!!!!
HAPPY PRINTING