1 / 1
PET-Cap (Watertight)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Place it as shown in the picture.
Recommend ≤ 0.3 mm layer height.
When tested it cold endure a lot of presure but when the cap is tilted it will not be greatly watertight! If the cap keeps turning, it's not on straight and thus means is tilted.