Nendoroid 2060 - Saint Tail Accessory Storage Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a functional storage box that allows both accessory storage and Nendoid display.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 35
- Makes
- 0
- Views
- 459
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Model Name : Nendoroid 2060 - Saint Tail Accessory Storage Box
Size : 120mm x 140mm x 210mm
Level : ★☆☆☆☆
Color Required : Pink, Transparent, Gold(Silk), Red
Designer : @Bread_Ryu
1) You must have the "Nendoroid 2060 - Saint Tail" figure.
2) You can find the assembly manual by turning over the photo. Please make sure to check it.
3) This model is based on FDM 3D printers.
4) The wall thickness must be set to 1.0mm. Assembly is not possible if the outer wall value is arbitrarily increased.
5) The model tolerance was adjusted as much as possible, but it may vary depending on the accuracy of the 3D printer you are using.