Moon Stand for WLED in 8266
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.25 – €0.31 net (excluding VAT)
For file: test_M601_0.4n_0.2mm_PLA_MK4IS_16m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.28 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 15.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Lithophane Moon Stand for WLED in 8266
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 411
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I reworked my project to use the addressable led tape (4 segments of three crystals) ws2812b and the d1 mini esp8266 module. Also, during printing, you need to insert a microusb module with soldered wires into the base - for this I added two gcode files - one with the M601 pause - but for some reason I had glitches with this and I cut the second file with the code M600 - color change, which I also added.
Also added two test gcodes so you can check first if your pause works and also to check if your microusb module fits.
List of modules I used:
1. D1 mini esp8266
2. ws2812 tape
3. Micro USB Dip
I installed the firmware from the wled install page through the web interface.
I added the connection diagram to the photos
If you have any questions, please ask