A coin for good luck in the year of the dragon 2024
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.29 – €0.36 net (excluding VAT)
For file: moneta 1-2 -0.2-30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.33 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 18 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A coin for good luck in the year of the dragon 2024.
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 145
- Makes
- 1
- Views
- 614
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
A coin for good luck in the year of the dragon. The coin size is 50 mm. Double-sided, on one side is a dragon on the other is a Chinese symbol of good luck. The thickness of the coin is 5 mm. It is possible to print the sides and then glue them with dichloroethane. or one-piece printing with support connection. Happy New Year 2024 and may everything be fine.
Монета на удачу в год дракона. Размер монеты 50 мм. Двухсторонняя, на одной стороне дракон на другой китайский символ удачи. Толщина монеты 5 мм. Возможна печать сторон и последующая склейка дихлорэтаном. или печать цельная с подключение поддержек. С Наступающим новым 2024 годом и пусть все будет хорошо.
Печать была выполнена пластиком PETG желтого цвета. Есть настройки для принтера Anycubic Kobra NEO 2.
The seal was made with yellow PETG plastic. There are settings for the Anycubic Kobra NEO 2 printer.
Parametr:
PETG yellow 1.75
Fdplast
temp extruder 196
temp bad 80