RC Helicopter Blade Windmill
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.51 – €1.85 net (excluding VAT)
For file: Windmill-Rotor-Head_0.4n_0.2mm_PETG_MK4_1h48m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.68 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.79 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Turn your old RC helicopter blades into a windmill.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 42
- Makes
- 0
- Views
- 756
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
These make great garden spinners if you have some old blades laying around.
I used 380mm RC heli blades. The pitch is set at 10° so these have a nice slow controlled spin.
I overbuilt everything for high winds so scale back as needed for your situation.
You will need:
- 1 set of 380 (or slightly less should fit too) RC helicopter blades.
- 2 M3x16 bolts and nuts.
- 2 608 skateboard bearings.
- 1 bolt and nut about 2.5 inches long that fits through the bearing.
- Some screws to attach it to a pole.