USB+Powerswitch extension MOD for Prusa MINI (+)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make your Prusa MINI (+) even better with a USB port and Powerswitch in the front of the printer!
- Rating
- 4.947 / 5
- Likes
- 286
- Downloads
- 1,177
- Makes
- 60
- Views
- 4,846
- Reviews
- 57
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To do the upgrade you need the following parts:
1x Frontplate (printed)
1x Powerswitch Extension cable
You can find the upgrade instructions here: installation guide
If you want a backplate, have a look here: backplates
There are two different designs, one with the USB port and on the front of the printer, and one on the side next to the display. The side of the cable which you plug in the printer has a 90 degrees angle so it doesn't get in the way of anything.
The parts are to extend the USB port and Powerswitch on the back of the printer to the front.