Elektra Beckum BAS 450-600 sawblade tensioning lever
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The M8 screw that is installed in the old bandsaws is really flimsy and wears out quickly, this replaces it.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
The M8 screw that is installed in the old bandsaws is really flimsy and wears out quickly, this replaces it. You need a long enough M8 screw and can then just slide this on to turn it. I recommend putting a washer underneath it. Works well so far, the screw will wear out a few more times I guess so it is nifty to be able to just (pretty cheaply) swap it. I printed it with 50% infill.
I also included the dxf so you could cut it out of wood or aluminium (don't forget to chamfer the edges). I originally wanted to do that, but the print works well.