Sauls barrage kite connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two types of connectors for the Sauls barrage kite.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 106
- Makes
- 0
- Views
- 554
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two different types of connectors for the Sauls barrage kite. Plans for the kite originally in DraMa, and now also availabe online on kite.builders. Can be printed in PLA and TPU. I sliced them with Cura (see also picture). I suggest to print them as shown, as then the layerstructure is best for the induced forces. I used 60% infill.
Connectors are designed for a 10mm main rod and 8mm secondary rod. As the file name indicates, the diameter of the drills are slighly oversized to allow for a loose fit. You will need 16 connectors of each type to build the kite.
Just as reference for the size of the kite, I have attached a picture of a kite which I built 10 years ago with connectors made of Aluminium.