1 / 1
K1 Nozzle Torque wrench
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
K1 Nozzle Torque add-on for K1/K1Max tool kit wrench
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 40
- Makes
- 0
- Views
- 637
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
Nozzle recommended tightening torque is 1.5-2.0 Nm. This torque tool add-on helps you to estimate needed force.
Printing PLA, three walls and four top&bottom layers, I get ~1.75 Nm
After the print you should calibrate the tool. You can use e.g. kitchen scale.
- Place wrench with the inserted torque tool on the scale
- Zero the scale
- See the (small hole) marker on the tool (r=70mm)
- Push on marker position towards the wrench till tool touch it
- Read the scale, expected value should be about:
- 2.50kg (5.6 lb) equals 1.75 Nm
- 2.86kg (6.4 lb) → 2.0 Nm
- 2.14kg (4.2 lb)→1.5 Nm
- If the reading is more what you're expecting adjust the printing parameters. Increasing needed force (torque tuning) you can put scotch tape layers under the root section.