1 / 5
Utility blade scraper with blade guard - blades with three notches
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix for blades with three notches on the top, also added a magnetic blade guard
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 127
- Makes
- 3
- Views
- 798
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I have these wird blades with three notches, these did not fit in the original model. I you want to check if your blades fit here please check the drawing with the measurements.
Secondly I added a magnetic blade guard, optimized for printing upright. It fits two 5*5*2mm magnets, these just lightly pressed in for me and that's it.
I also added a hook to grip into the hole on the blade to keep if from pulling out, it is however still compatible with the original top part, if you trim the front corners a bit.