1 / 8
Garbage bag holding clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple trash bag clip ...
- Rating
- 5 / 5
- Likes
- 333
- Downloads
- 538
- Makes
- 1
- Views
- 6,195
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
The stl files are configured for 23.8mm ticknes, if your shelf is a little below than 23.8mm you can use it as this.
But i think is better to adjust the parameters with the .f3d file a little more 0.3mm at your value and use the two bolts for final tightening.
But don't forget this is PLA bolts and not Steel ... don't tight to much ;) ....
I use two 3.5x40 screws to assemble
Place the bag inside the two arm et clip it.
I join the parametric f3d file if you want to use with your own values ...