Happy Birthday Glasses with age digits
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of https://www.printables.com/model/161500-happy-birthday-glasses to add age digits on the sides.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 72
- Makes
- 0
- Views
- 318
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Costume Accessories
- License
- Creative Commons — Attribution
Prusa Slicer 2.7.1 was used to make the modifications. To customize for any age you can edit the Text and Generic-Box parts to suit, directly in the slicer
The following instructions are quoted from the original model:
"Front face has to be printed as flat, I bent it using a little heat from hair dryer after print.
It brings better results, than trying to print it bent with the supports.
Temples are attached using two small pieces of 1.75mm filament, so I could avoid the problem with tiny screws."
I'll add that using a soldering iron on low heat with a flat tip worked very well to basically “peen over” the ends of the filament hinge pins.