1 / 3
Magnetic hydrometer holder (Bambu Lab and any other printer with metal frame)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple holder for hydrometer for metal frame printer such as Bambu Lab P1S, P1P, X1, X1C, etc.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 37
- Makes
- 2
- Views
- 251
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple holder for hydrometer for metal frame printer such as Bambu Lab P1S, P1P, X1, X1C, etc.
If you are missing a variant for your magnets, write me a message and I'll add the one you need.
Print Settings
Material: PETG / ASA / ABS (or you can print yours with PLA, if you don't print that much with higher build plate temperature)
Layer height: 0.2 mm
Perimeters: 2
Top layers: 3 layers
Bottom layers: 3 layers
Infill: 15%
Supports: no