1 / 1
Buffalo Trace Logo
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge creation of Buffalo Trace logo
- Rating
- 4 / 5
- Likes
- 12
- Downloads
- 96
- Makes
- 1
- Views
- 524
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Inland Military Brown Transmission Distance: 5
PLA Inland Brown Transmission Distance: 5
PLA CC3D Copper Silk Transmission Distance: 5
PLA Inland Sand Transmission Distance: 6
Swap Instructions:
Start with Military Brown
At layer #11 (0.96mm) swap to Brown
At layer #17 (1.44mm) swap to Copper Silk
At layer #25 (2.08mm) swap to Sand for the rest.