Adjustable Z axis limit switch - Two Three Bluer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bluer is an excellent 3D printer but there is always room for improvement
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 75
- Makes
- 0
- Views
- 826
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
P.S: After printing I made a modification to the guides and the location where the switch wiring goes
Português - A Bluer é uma excelente impressora 3D porém sempre é possível melhorar. Com esse ajuste do fim de curso do Z fica mais fácil calibrar altura da mesa sem que seja necessário soltar o parafuso do perfil e ajustar manualmente na "tentativa e erro" o fim de curso .
Serão necessários além da impressão apenas 2 parafusos e 2 porcas nas seguintes medidas:
M4 sextavado - 10mm comprimento
M4 sextavado - 20mm comprimento
Caso não ache estes parafusos sextavados poderão ser usados parafusos de cabeça redonda com as laterais da cabeça limada ou esmerilhada de tal forma que caiba no encaixe para que o parafuso não rode ao girar o ajuste.
English - Bluer is an excellent 3D printer but there is always room for improvement. With this adjustment of the Z limit switch, it is easier to calibrate the table height without having to loosen the profile screw and manually adjust the limit switch in the "trial and error".
In addition to printing, only 2 screws and 2 nuts will be required in the following measures:
Hexagonal M4 - 10mm length
Hexagonal M4 - 20mm length
If you do not find these hexagonal screws, you can use round head screws with the sides of the head polished or ground in such a way that it fits into the socket so that the screw does not turn when turning the adjustment.
Print Settings
Printer:
Two Three Bluer
Rafts:
No
Yes
Resolution:
200
35
Filament: PolyMaker ABS Post-Printing
Category: 3D Printer Accessories