Gekko Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A snappy supportless magnetic (or nonmagnetic) container inspired by Gekko from Valorant.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 29
- Makes
- 0
- Views
- 234
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Attribution — Noncommercial
A snappy supportless magnetic (or nonmagnetic) container inspired by Gekko from Valorant (Very easy assembly).
You can find 2 versions of the model, one with magnet slots (10x3mm) and a loose joint to add that snappy effect. The other has no slots for magnets and has a tighter joint to hold the cover well.
Use any adhesive to stick the “Initiator symbol” and the magnets (there are 4 of them).
No support is needed for any of the parts but you MUST rotate the parts 180 degrees on your slicer. Printed at 20% infill and 0.2 layer height, however, I recommend lowering the layer height for better results.
I will be making more of these boxes for other agents, suggest which one should be next!