Flash Card Boxes and Dividers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple box for holding flash cards, with section dividers
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 59
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other 3D Objects for Learning
- License
- Creative Commons — Attribution
These are designed for cards that measure 60x90 mm, so check your dimensions before printing. The inside of the box is 62 mm wide, which gives a comfortable fit for the 60 mm cards. The walls are 2 mm thick with a 1 mm raised panel on each side for added rigidity with less filament. The dividers help keep the categories organized. The dividers print in two layers at 0.2 mm per layer, so they're thin and flexible but strong.
I designed them for this flash card set: Ednzion Bilingual English & Spanish Flash Cards for Toddlers (Amazon associate link)
I included the Blender file in case you want to make any more adjustments.