Flexure Fractal Vise Jaws - V6
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.74 – €9.46 net (excluding VAT)
For file: FFV_V6_0.6n_0.48mm_PETG_MK3S_4h30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.60 excluding VAT (range midpoint).
- Weight reported by the author
- 207 g
- Print time reported by the author
- 4.5 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A take on the fractal vise utilizing flexures in place of the bearings for the rotations....V6
- Rating
- 5 / 5
- Likes
- 88
- Downloads
- 253
- Makes
- 1
- Views
- 2,305
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
A take on the fractal vise utilizing flexures in place of the bearings for the rotations.
I've got a running article on the various versions here, and the models for this one and V5 are on OnShape here.
This rev is essentially just a slightly beefed up V5. I thickened up the jaws themselves (the V5s were intentionally a bit thinner than desired to speed iteration), and also thickened the 2nd and 3rd order flexures, counting the jaw flexures as layer 1.
I also significantly thickened the out of plane thickness as it gets closer to the jaw. This was primarily aimed at increasing the torsional stiffness overall as well as to allow the jaws to rest on the Panavise bracket instead of ‘floating’.
Category: Tools