1 / 1
92mm fan mount for Asustor Flashstor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Full replacement for stock fan mounting bracket. Allows use of a 14mm or slimmer 92mm fan.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 53
- Makes
- 0
- Views
- 524
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The stock fan is terrible! Replace it with a bigger one without irreversible modifications! Mounts with original screws. Tested with a Noctua NF-A9x14 fan. The feet are 1mm shorter than required to facilitate use of a non-slip/rubber/etc pad.
Notes:
- The 4-pin fan connector on the Flashstor is the standard pinout, but the middle key of a standard 4-pin fan will need to be shaved down to plug it in
- This may result in increased temperatures. Manual modification of fan curves may be needed - especially for slower fans like the Noctua
- Model is available as a split model for smaller printers (ie, Prusa Mini), or as a single complete part