Batwing by Wcad

This is my take on a batwing. its 100% my design and a real labor of love for me. assembly is pretty strait forward.

the model is almost 80 cm across so be mindful of that. also attached an assembly guide, not the best, but like i said, it shoud be pretty straight forward..

all pieces printed perfectly and require no sanding.

Hope you enjoy this model and whom ever decides to take on this print please feel free to contact me for anything.

its all printed in BL matt charcoal PLA, and i have to say it turned out gorgeous

Also it is split so that all plates print in 1-2 hours, so it minimises the printers usage; there are two exceptions on the large parts of the wings but that is it.

Also photos are available at

https://s.go.ro/vs3zltii | password: 230926

there are over 60 so i couldnt upload them here.

I recommend going on the original post page on maker world for the additional assembly details in the comments and complete 3mf profile with the print settings

https://makerworld.com/en/models/79065#profileId-83378