1 / 2
Voron 0 USB Camera Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A camera mount for a common USB Camera Module to be installed in a Voron 0
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 214
- Makes
- 3
- Views
- 1,413
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
- This model is optimized to be printed without supports!
- Use ABS (maybe PETG if you dont plan on enclosing your V0)
- I used a Ov3660 USB Camera but there are newer versions out there
- My camera has a 64° FOV, a 110° version of the camera works as well but the angle is not optimized for it.
- Make sure to orient the camera with the port on the bottom or the x-beam will ram into the cable and break out the connector on the camera module
- You need 2x M2x6 and 1x M3x6 or M3x8