FLSUN QQS Pro Direct Drive Mod (with Creality Kolibri Extruder)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hotend Mount with integrated Extruder Holder for Direct Drive Conversion
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 56
- Makes
- 0
- Views
- 938
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
I created a Hotend holder that simultaneously holds the Creality Kolibri Extruder and converts it into a direct drive extruder.
The original Part Cooling fans can still be used, any J-Head hotend can be used as Hotend. (Depending on the length, the Fan ducts may need to be adjusted).
Requirements:
3x M3x8 screws (cage on effector)
2x M3x20 screws and 2x M3 nuts (clamp on cage)
3x M3x6 screws (extruder on cage/clamp)
1x small piece of PTFE Tube (depending on your Hotend, it should stick out 5mm from the Heatsink/Coupling).
The parts should be printed from PETG, better from ABS/ASA
Note: if you buy the complete Kolibri extruder, you have to Invert the Stepper Motor direction.