1 / 2
Framebuilding small tube bend mandrel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For bending 7mm OD tubing used for internal hose guide tubes.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 24
- Makes
- 0
- Views
- 331
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Easy way to bend 7mm OD tubing for internal guide hoses.
Clamp the mandrel in a vice and use the angle markers to help bend tube to the required angle.
This will give approximately a 50mm radius bend on centreline.